Sheet 10 · Mnástrojárna s.r.o.

Service

CNC machining

Send us a drawing, receive a finished part. Machined, heat-treated, surface-finished and inspected – with no other suppliers to coordinate.

Request a quote Technical question for our process engineer

The challenge

A machined part often travels between the machine shop, the heat-treatment plant and the plating shop. Every transfer adds days, transport costs and the question of who is responsible when something doesn't fit.

How we solve it

01Our process engineer plans the route with as few set-ups as possible – fewer operations, fewer errors.
02We mill in 3 and 5 axes; rotational parts are produced on a twin-spindle turn-mill centre.
03Heat treatment and surface finishing are arranged within a single order.
04Before dispatch we inspect the part and archive the results for repeat deliveries.

What you get

Finished part to drawing, including all treatments
Final inspection results
Material certificates on request
A locked-in process for repeat orders

Typical jobs

Shafts and pinsFlanges and bushingsMounting and clamping platesGearsHousings, frames and brackets

Technology

What we make it on

5-axis machining centre

AXILE G8

The largest machine in our workshop. It machines parts up to one metre in diameter and three tonnes in weight in five simultaneous axes, in a single set-up – and measures the workpiece and tools itself.

Max. workpiece diameter: 1,000 mm
Table load: 3,000 kg
Travels X / Y / Z: 800 / 850 / 550 mm
A / C axes: ±120° / 380°
Spindle speed: 15,000 rpm
Tool magazine: 120
Table diameter: 800 mm
Spindle taper: HSK 63A

Acquired under the project „Vybavení nového prototypového centra společnosti MNástrojárna s.r.o.“ (Equipment of the new prototype centre of MNástrojárna s.r.o.), reg. no. CZ.01.1.02/0.0/0.0/17_093/0012410.

Twin-spindle lathe + 5-axis milling centre

HYPERTUN 65 Powermill

A lathe and a 5-axis milling machine in one. A rotational part with milled features is completed in a single cycle – with no transfers between machines and no further set-ups.

Max. turning length: 1,150 mm
Swing over bed: 500 mm
Distance between spindles: 1,300 mm
Spindle bore: 64 mm
Chuck size: 250 mm
Spindle speed: 5,000 rpm (C axis)
Milling head: 12,000 rpm
Tool magazine: 104

Acquired under the project „Vybavení prototypové dílny společnosti Mnástrojárna s.r.o.“ (Equipment of the prototype workshop of Mnástrojárna s.r.o.), reg. no. CZ.01.1.02/0.0/0.0/16_092/0010019.

Vertical machining centre

MCV 754Q

A rigid vertical centre with direct position measurement via linear scales. Our workhorse for precise prismatic parts and plates.

Travels X / Y / Z: 754 / 500 / 550 mm
Table size: 1,000 × 500 mm
Table load: 400 kg
Spindle speed: 10,000 rpm
Tool magazine: 24
Spindle taper: ISO 40

3-axis milling centre

VMCA 760

A quick-changeover 3-axis centre for one-off production – milling, drilling, boring and threading.

Travels X / Y / Z: 760 / 440 / 460 mm
Table size: 900 × 410 mm
Table load: 350 kg
Spindle speed: 8,000 rpm
Spindle taper: ISO 40

CNC lathe

SAB 50 CNC

A productive slant-bed CNC lathe for rotational parts in repeat batches.

Design: slant bed, linear guides
Control: Fagor

FAQ

Frequently asked questions

Which materials do you machine?

Structural and tool steels, stainless steel, aluminium, non-ferrous metals, engineering plastics and composites. For special materials our process engineer will confirm manufacturability before we quote.

Can you also arrange hardening and surface treatment?

Yes. We deliver the part complete, including heat treatment and surface finishing – you deal with one supplier and one point of responsibility.

More services

CNC machining? Send us the drawing.

Our process engineer assesses manufacturability, and our sales team prepares a quotation with price and lead time. All data is handled in strict confidence.

Send a drawing by e-mail +420 734 846 246

Primary contact: Vít Volný · Sales Representative · vit.volny@mnastrojarna.cz

B2B projects from CZK 50,000 · ISO 9001 & 14001 · Pelhřimov, central Czech Republic